CiT F3 Black Micro-ATX Curved Window PC Gaming Case with 3 x 120mm ARGB Fans

Description The CiT F3 is a Micro-ATX designed with a concentrated focus on aesthetics, it comes equipped with a striking exterior users can enjoy an extensive view of your components, ARGB and PC building skills. This mATX chassis features a striking curved window panel providing a stunning aesthetic and offers an uninterrupted view of all your gaming hardware. The case features three pre-installed fans, maximising it’s potential and with the possibility to mount additional fans and radiators, this is a high quality Micro-ATX where not an inch of space goes to waste. Three 120mm ARGB fans catch the eye with stunning colour modes on offer at the touch of a button not only make the F3 stand out but ensures all important components are catered for when it comes to keeping temperatures balanced and conditions optimised for a peak performance. Moving onto the side panel towards the bottom of the case is the I/O panel providing USB2.0 and USB3.0 connections and inside the F3 the included ARGB fans have approximately 15 LED modes available or have access to 16.8 million colours using a compatible addressable RGB Motherboard. A tempered glass panel showcases your build setup. Measuring 39.6 centimetres in height, the interior painted in all black with a full PSU shroud that adds to the sleek and unobtrusive look. Space to install a Micro-ATX or Mini-ITX motherboard and for a small surface area there is still plenty of space to install powerful hardware. It can fit a graphics card up to 31 centimetres in length and within the PSU shroud users will find space for two hard drives. Within the PSU shroud an ATX power supply unit will fit measuring up to 160mm. The F3 is a small stylish Micro, aside from the aesthetics the performance and functionality is not disregarded. Upgrade your build and boost your aesthetic levels. Built for the gamers with its eye-catching exterior design, this elegant mATX combines aesthetics with performance. Set the standards and gain the upper hand. Key Features Windowed Micro-ATX – Elevate your viewing experience with the CiT F3. This extremely stylish Micro-ATX finished in all black and features an elegant curved window boasting optimal curvature wrapping around the front and side. The edge-to-edge front and side panelling captures the attention and draws the eye of the viewer into the case. Unreal display potential the F3 offers an uninterrupted view of all your gaming hardware. Cooling Fan & Radiator Support – The perfect balance of air running through the case featuring three pre-installed fans, two pre-installed on the top panel and one pre-installed on the rear. Alongside the three pre-installed fans there is one more position available for 120mm fans to be fitted on the bottom. Another option the F3 can support a 240mm radiator at the top of the chassis crafting a highly efficient thermal solution. Chassis Ventilation – The F3 is built with perforated air vents throughout the case, vents are situated on the side panel, top panel, PSU chamber and rear exhaust to ensure excellent airflow. Motherboard Software – The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects. Daisy Chain Set Up – Delivering great cooling without complex connections and a hub, a daisy chain set up lets you power all pre-installed fans through a single connector and flick between 15 colour modes & link additional fans. Saving space and cutting down on the cable management. Micro-ATX Housing – The F3 can accommodate Micro-ATX, & Mini-ITX motherboards; Supports GPU cards up to 310mm in length, air coolers up to 165mm in height, and Standard ATX PSUs up to 160mm in length. Clean Interior – To keep the interior looking clean there is a full PSU shroud capable of holding ATX power supplies and for storage there is space within the shroud to fit a single SSD and HDD or two SSDs or HDDs. Two Colours – Build a sleek PC with the F3 available in classic black or pure white, pick a colour that suits your style. Specifications Chassis Dimensions (Excluding Fascia / Panels): (W) 200 x (H) 380 x (D) 310mm Water Cooling Support: Top Supported Radiator(s): 120mm and 240mm Rear Supported Radiator(s): 120mm 3 x ARGB Fans Included: Top Fan Powered Via: Slave Fan – 4pin Proprietary Top Fan LEDs Powered Via: Slave Fan – 4pin Proprietary Rear Fan Powered Via: Master Fan – SATA Rear Fan LEDs Powered Via: Master Fan – SATA General Specifications: Max. Motherboard Size: (W) 244 x (D) 244mm PSU Max. Length (mm): 160mm Case Specifications Form Factor: Micro ATX Motherboard Support: Micro ATX, Mini ITX PSU Support: Standard ATX PSU Location: Bottom Gaming Case: Yes Water Cooling: Water Cooling Ready! Supported Radiator Size: 240mm Supported Radiator Positions: Top Body Material: 0.45mmSPCC Front Bezel Material: ABS & Curved Acrylic Side Panel: Tempered Glass Internal Cable Management Depth: 20mm External Bays: Internal Bays: 2 x 3.5” Internal 2 x 2.5” Internal Drive Bay Notes: 2 x 2.5″ shared with 2 x 3.5″ Expansion Slots: 4 x Full Size Cooling Front: None Cooling Top: Space For 2 x 120mm Fans (2 x 120mm ARGB Fans Included) Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm ARGB Fan Included) Cooling Side: None Cooling Bottom: Space For 2 x 120mm Fans IO Ports: 1 x USB 3.0 1 x USB 2.0 1 x HD Audio 1 x Microphone GPU Max Length: 310mm CPU Cooler Maximum Height: 165mm Front Bezel Colour: Black / Clear Body Colour: Black System Cabinet Features: PSU Included: No General Specifications Manufacturer Part Number: CIT-F3GL-BLK-ARGB EAN Number: 5055492416889 Has Mains Plug: No Colour: Black What’s In The Box: Case Accessories Manual Unit (Product) Dimensions (mm): 200mm x 396mm x 333mm (W x H x D) Packaging Dimensions (mm): 431mm x 393mm x 252mm (W x H x D) Net Weight (KGs): 3.3 KGs Gross Weight (KGs): 4 KGs